Clear PVC strip – Freezer Grade is recommended by Rayflex Group for use in freezer applications operating between +30°c to -40°c. The PVC operates best in applications where the temperature is constantly below -0°c, above this temperature the material is too soft for general use and will stick to itself making passage between areas trickier than required. If you expect your PVC kit to operate above freezing and it will only occasional drop below -0°c then you should consider using our standard grade PVC Strip.
With replacement PVC strip you must order the total amount you require in metres (there is a minimum order charge of £30 net on the product) we also assume by default that you require 1 cut piece. For example if you order 20m in total we will send 1 x 20m length of pvc strip. If, however, you want the 20m to be cut into 10 x 2m long pieces then please state this at checkout.
You might also be interested in the associated hardware and suspension system so you can make your own pvc doorkit, if so please refer to the following SUSPENSION RAILS AND HARDWARE SECTION.
Please contact our technical department if you require any assistance in product recommendation.
Freezer Grade PVC Strip is used in various applications industry wide that require:
- Temperature regulation – PVC strip curtains are an ideal for walk in freezers applications and where the temperature is permanently below freezing;
- Refrigerated Vehicles – PVC curtains are used extensively on refrigerated vehicles to keep the vehicle temperature at a constant when delivering food and medical supplies;
- Product Preservation – if freezer doors are left open, pvc strip curtains close automatically minimising loss of temperature and contamination of stock;
- Health and Safety – pvc strip is effective barrier between food storage and preparation areas - helps to prevent cross contamination;
Please note we have a minimum order charge of £30 net on the product and bespoke replacement strips are non-returnable